Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
All of the parts you see here are in reproduction are also available in used. The advantage of buying good rust free Western inner structure parts is not only do you get original, FoMoCo parts but you get detail items not found on reproductions. Keep in mind Cougars all had wrap around shock towers in 69-70. Another advantage to used is that we can leave them intact in most any configuration you need including a 100% complete front structure. Give us a call for details on the "custom" cut you are needing.

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 192
Price: $253.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19899 -

Reproduction "A" pillar repair panels for your 67 - 68 Cougar or Mustang. Included in this kit are the two pillar patches and four backing plates for the door hinges.

Price: $50.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30963 -

Reproduction driver side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30961 -

Reproduction driver side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

Price: $149.15

Buy Details

Availability: In-Stock Item
Item #: 26916 -

Reproduction inner "A" pillar panel and fresh air vent vent panel set for the driver side (left hand) of the Mercury Cougar or Ford Mustang. This item features weld through primer and is ready to install. Unfortunately both Cougars and Mustangs alike are prone to rust in these areas, so finding a nice original piece can be difficult. We're delighted to have this high quality panel set to offer you the perfect pieces to replace those rusty units you have now!

Price: $143.65

Buy Details

Availability: In-Stock Item
Item #: 26917 -

Reproduction inner "A" pillar and fresh air vent panel set for the passenger side (right hand) of the Mercury Cougar or Ford Mustang. This item features weld through primer and is ready to install. Unfortunately both Cougars and Mustangs alike are prone to rust in these areas, so finding a nice original piece can be difficult. We're delighted to have this high quality panel set to offer you the perfect pieces to replace those rusty units you have now!

Price: $50.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30962 -

Reproduction passenger side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30960 -

Reproduction passenger side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

Price: $12.35

Buy Details

Availability: In-Stock Item
Item #: 10090 -

Reproduction driver side (left hand) rear apron extension for 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Price: $12.35

Buy Details

Availability: In-Stock Item
Item #: 10089 -

Reproduction passenger side (right hand) rear apron extension for the 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13008 -

Metal reinforcing plate welded to the center of the rear body, where the third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1967-68 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang. 9 inch rear ends would be as shown. 8 inch rear ends would have a rubber axle snubber bumper attached. See related items.This part will come as shown, spot welds will need to be drilled and...

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13157 -

Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1969-70 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang. This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13369 -

Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1971-73 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang.This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19330 -

Ford part # for the nut is 33772-S4, for the bolt 370301-S8, and the flat washer 358994-S.Slight changes in the hardware between the start of 1969 and the end of 1970. We see a slight difference in the height of the nut. Hard to tell unless side by side.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19000 -

7/16-14 x 1-1/4" style bolt and nut for installing the shock tower brace to the cowl. One bolt and nut. Usually we see the tall nuts, sometimes there are slightly shorter nuts. Not sure if Dearborn or San Jose thing or supplier variations, during the two years of production. Ford part # for the nut is 375918-S7-8, bolt 370301-S8.

Price: $27.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16214 -

Bracket with attached rubber bumper that attaches to the center body plate over the 8 inch third member of any 1967-68 Mercury Cougar. Attaches with a single bolt, body plate available separately.

Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27221 -

Used driver side (left hand) coil spring cover that is a good solid western part for Mercury Cougar and Ford Mustang.Ford part # D1ZZ-3383.

Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24315 -

Used passenger side coil spring cover, taken from a parts car. Ford part # C7ZZ-3382-A.

Price: $45.55

Buy Details

Availability: Discontinued
Item #: 20163 -

Reproduction driver side (left hand) outer shock tower cover for Mercury Cougar and Ford Mustang. We cannot stand behind this product as it is an ill fitting reproduction, however do offer rust free used originals. No returns accepted.

Price: $45.55

Buy Details

Availability: In-Stock Item
Item #: 20164 -

Reproduction passenger side (right hand) outer shock tower cover for Mercury Cougar and Ford Mustang. We cannot stand behind this product as it is an ill fitting reproduction, however do offer rust free used originals. No returns accepted.

Price: $30.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19654 -

Used passenger side (right hand) coil spring cover that is a good solid western part for Mercury Cougar and Ford Mustang. Ford part # D1ZZ-3382.

Price: $226.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11688 -

Get ready for some serious labor if your car needs this complete panel!

Price: $210.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11690 -

Reproduction cowl center panel for Mercury Cougar and Ford Mustang.

Price: $506.25

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 11689 -

Reproduction 2 piece cowl panel for the Mercury Cougar or Ford Mustang.Here's our video to help you fortify your Cougar!

Price: $389.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30973 -

This is the upper portion only and will be cut generous, which means you will have a lot of time in cleaning it up and making it ready for install.

Price: $394.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 10225 -

This cowl is made for a car without AC but all you have to do to modify for a factory AC car is plug the vent hole on the driver side. Replaces Ford part # D1ZZ-6502010-A.

Price: $46.67

Buy Details

Availability: In-Stock Item
Item #: 25963 -

This kit is good for cowls with moderate to minimal rust. Easy to install on the driver side, but takes more effort on the passenger side especially if you have A/C. Another way to avoid doing expensive cowl repairs is to purchase our cowl cover.

Price: $69.15

Buy Details

Availability: Out of Stock
Item #: 11372 -

This is the reproduction cross member offered by most of the Mustang vendors. It is over 1.5 Lbs lighter than the factory cross members. We highly recommend purchasing our remanufactured, re-enforced cross member. It is crucial that you use the correct tapered bolts when installing these.

Price: $93.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11373 -

Good original part that has not been noticeably twisted, bumped, bent, or heavily rusted. Notice the factory indentations that are a result of the manufacturing process (dent from jig). Also know that there is always at least a couple minor dings or scrapes from decades of being the lowest point of the car. Much better fit than repro and note the repro is made from thinner gauge steel. Also know that we generally do not bead blast our used parts before sending them but often we show them on...

Price: $29.57

Buy Details

Availability: Out of Stock
Item #: 11383 -

This reproduction radiator support crossmember is correct for the 1967-68 Mercury Cougar and Ford Mustang, but will work on any 1967-70 Cat or Pony.Replaces Ford # C7ZZ-6510852-B or C9ZZ-6510852.

Price: $134.55

Buy Details

Availability: In-Stock Item
Item #: 10004 -

Reproduction Crossmember / Under Engine for the 1971 - 1973 Mercury Cougar / 1971 - 1973 Ford Mustang 

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32196 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: In-Stock Item
Item #: 22565 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31627 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32198 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22566 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31628 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19926 -

1967 Front unibody cut, this one has only one torque box which is located on the driver side of the car. If originality isn't an issue we recommend 1968 versions that have both torque boxes, which adds strength. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of labor is needed to replace individual...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27222 -

1967 Front unibody cut, this one has only one torque box which is located on the driver side of the car. If originality isn't an issue we recommend 1968 versions that have both torque boxes, which adds strength. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of labor is needed to replace individual...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27223 -

1968 Front unibody cut, these 1968 front structures have two torque boxes, unlike the 1967 with only one. This item has the cowl cutouts for factory air conditioning. No shock tower reinforcing, consider 1969 front cuts if you desire the bracing.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27226 -

1969 Front unibody cut, these 1969 Mercury Cougar front structures all have reinforced shock tower braces like the 390 and 428 Cobra Jet Mustangs. Mustang guys, please note, we do not have them without these braces. This cowl only ships with the holes for the factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27227 -

1970 Front unibody cut, these 1970 Mercury Cougar front structures all have reinforced shock tower braces like the 428 Cobra Jet Mustangs. Additionally these have the cutouts on top of the radiator core support for the Mustang twist locks. Mustang guys, please note, we do not have them without these braces. This cowl has the holes for the factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27228 -

1971-72 Front unibody cut with cowl. This cowl has the holes for the factory air conditioning. 1973 frame rails are constructed differently for the energy absorbing front bumpers.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of labor is needed to replace individual aprons, towers, radiator...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27231 -

1973 Front unibody cut with cowl. This cowl has the holes for the factory air conditioning. 1971-72 frame rails are constructed differently for the non-energy absorbing front bumpers.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours of labor is needed to replace individual aprons, towers, radiator...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27224 -

1968 Front unibody cut, these 1968 front structures have two torque boxes, unlike the 1967 with only one. This item does not have cowl cutouts for factory air conditioning. No shock tower reinforcing, consider 1969 front cuts if you desire the bracing.Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a Mercury Cougar or Ford Mustang year for year. How many hours...

Price: $963.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27225 -

1969 Front unibody cut, these 1969 Mercury Cougar front structures all have reinforced shock tower braces like the 390 and 428 Cobra Jet Mustangs. Mustang guys, please note, we do not have them without these braces. This cowl only has the holes for the heater hoses only, not cut for factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or Mustang - including fastbacks! No differences exist between the front understructures of a...

Price: $1,200.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27229 -

1970 Front unibody cut, these 1970 Mercury Cougar front structures all have reinforced shock tower braces like the 428 Cobra Jet Mustangs. Additionally these have the cutouts on top of the radiator core support for the Mustang twist locks. Mustang guys, please note, we do not have them without these braces. This cowl only has the holes for the heater hoses only, not cut for factory air conditioning. Excellent value! Please consider a front clip replacement for your vintage 1967-73 Cougar or...

  • < Prev