Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: https://secure.cougarpartscatalog.com/store/onepagecheckout.aspx.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Feel free to request a certain color but keep in mind we fill orders primarily based on condition.

Our grading system is only a guideline in determining condition and value of our used panels. Obviously not every panel is going to fit exactly in eight grade B or grade A category. We encourage you to call prior to making a decision to purchase used sheet-metal on our site. When you call we can actually describe to you over the phone where the damage is on any one panel and what the exact price would be for a grade A-, B+ or NOS panel. Our goal is for you the customer to know exactly what you're getting before you get it and to be 100% satisfied with your purchase once you receive it.

Please note that even for items in this section that the online catalog calculates that shipping for, the shipping may need to be adjusted manually to account for dimensions and for crating. In most cases it is best to choose "Manually Calculate My Shipping."


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 303
Price: $253.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19899 -

Reproduction "A" pillar repair panels for your 67 - 68 Cougar or Mustang. Included in this kit are the two pillar patches and four backing plates for the door hinges.

Price: $1,099.89

Buy Details

Availability: Out of Stock
Item #: 30448 -

Good used solid panel with all parts removed. Panel measures 19.5" x 37". Whereas at first glance these may all look the same, the contour of the roof changes with the body style changes. Call us for price and availability on panels with varying degrees of repairable rust.

Price: $350.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33434 -

Grade B used panel with all parts removed. Panel measures 19.5" x 37". Whereas at first glance these may all look the same, the contour of the roof changes with the body style changes. Grade B will have some rust through in several places. 

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41302 -

These reproduction fender to pillar bracket bolts fit both the Standard and XR7.

Price: $4.05

Buy Details

Availability: In-Stock Item
Item #: 41110 -

Reproduction pair of 1 1/8" long hood latch support bolts for the 1968 Mercury Cougar. Looking through cars with original parts, we've found a few different variations of the types of bolts used. It would be best to measure what you have and purchase the correct length bolts.

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41312 -

These reproduction hood latch catch bolts fit both the Standard and XR7.

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41111 -

Reproduction pair of 7/8" long hood latch support bolts for the 1968 Mercury Cougar. Looking through cars with original parts, we've found a few different variations of the types of bolts used. It would be best to measure what you have and purchase the correct length bolts.

Price: $11.34

Buy Details

Availability: Out of Stock
Item #: 41099 -

Reproduction bolts and U nuts for mounting the front valances on either a Mercury Cougar or Ford Mustang.

Price: $9.75

Buy Details

Availability: In-Stock Item
Item #: 41112 -

Here are our reproduction hood latch support brace bolts and U nuts for the Mercury Cougar.

Price: $259.88

Buy Details

Availability: In-Stock Item
Item #: 31205 -

This plasma cut patch was taken from the complete skin we list. We do this because not only do some customers not want to replace the entire skin, but often our foreign customers do not want to pay freight for an entire panel. Give us an outline if your requirements for a cut are are different from what is shown, and often we can accommodate.

Price: $259.88

Buy Details

Availability: In-Stock Item
Item #: 31206 -

This plasma cut patch was taken from the complete skin we list. We do this because not only do some customers not want to replace the entire skin, but often our foreign customers do not want to pay freight for an entire panel. Give us an outline if your requirements for a cut are are different from what is shown, and often we can accommodate.

Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12091 -

This clip looks just like the larger quarter extension moulding / trim moulding clip, but is smaller (as our comparison picture shows). One clip per side is used to attach the tail end (smaller end) of the moulding / trim to the extension. This unit is also almost exactly the same as the rear deck / trunk lid moulding / trim clip, but this quarter extension clip has a slightly shorter stud. Rarely will the clip you get look as good as the pictured here, usually the "finger" will be missing....

Price: $4.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26506 -

Used clip to attach the rear deck / trunk lid moulding / trim on the Mercury Cougar that comes with a reproduction cadmium plated acorn nut. Seven of these clips were used to mount the anodized aluminum 1967-68 trunk lip moulding / trim to the trunk. These clip can also be found on some early 1969 Cougars with a stainless steel deck moulding / trim. This used clip is for our type "A" personality purists that insist on having the original part, even though nobody will ever see it. If ultimate...

Price: $599.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12-2000 -

We ask that you call us on this one. Roof cut includes the roof skin, 'A' pillars cut about 4 inches from the top, rear or 'C' pillars cut below the leaded seam. We have plenty of inexpensive, damage free roofs that have never had a vinyl top installed. If you want the pillars intact this triples the size of the crate and makes it cost prohibitive in most cases. Longer cuts with long extended pillars add greatly to the cost of shipping. This is a perfect cut for a Cougar owner looking to...

Price: $532.35

Buy Details

Availability: In-Stock Item
Item #: 31617 -

This listing is for a set of four inner and outer wheel houses. Not only will buying a set of four save you money on the purchase price but it will save you on shipping as we remove them from their individual boxes and nest them together in one box.Attention international customers:This set is too large for us to ship directly in a single box using any of the international shipping methods we offer.  If you would like to buy this kit, you can either: Use a shipping broker to...

MSRP:$85.00
Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26989 -

These are Grade "B" cowl cover panels. These units may have one or two small dents, but can be an easily straightened and made to be perfect. Ford part # C9ZZ-6502010-A.

Price: $460.05

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31712 -

Reproduction cowl panel for the 67 - 68 Mercury Cougar. This is the upper portion visible from the top of the car.  This panel is unique to Cougar as it does not have the crown in the middle like the Mustang cowl panel has.NOTE! Dynacorn is currently welding the two halves together in house. This makes them almost impossible to install. We have talked to them about just sending the two halves apart and thought they were on board but alas these are still being spot welded together and...

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32196 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: In-Stock Item
Item #: 22565 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31627 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32198 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22566 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31628 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Out of Stock
Item #: 32194 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $194.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32195 -

Custom cut from a coupe but will fit on a convertible. Send us a picture of where you would like us to cut and we will accommodate. Price may vary depending on where we cut, shipping will vary.

Price: $270.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14528 -

You may consider buying our grade "B" door over our grade "A" door if you are doing a high end restoration. Here is the reasoning; due to the design of the 67-68 door, silt is trapped in all of the door corners, these tight recesses always have silt collected in them and when you add moisture you get corrosion. Our grade "A" doors do not have noticeable blisters but since there is no paint or sound deadener in the depths of the corners we know there is some amount of corrosion taking place...

Price: $264.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11250 -

You may consider buying our grade "B" door over our grade "A" door if you are doing a high end restoration. Here is the reasoning; due to the design of the 71-73 door, silt is trapped in all of the door corners, these tight recesses always have silt collected in them and when you add moisture you get corrosion. Our grade "A" doors do not have noticeable blisters but since there is no paint or sound deadener in the depths of the corners we know there is some amount of corrosion taking place...

Price: $545.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23436 -

The Best To Be Found. Grade "A" doors have never been dented in, cracked in the door latch area or rusted along the bottom seam. There are no drilled holes for an after market impact strip and the sound deadener is still intact. Occasionally it will still bear the original paint but do expect multiple small door dings. This is the best condition Western door you could ever hope to find, satisfaction guaranteed. Included in the price is a wooden crate, discount applies when you pick it up in...

Price: $474.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23679 -

Grade "A" doors have never been dented in, cracked in the door latch area or rusted in the corners under the weatherstrip. When you turn it over and inspect it, the bottom seam it is not expanding from the inside out due to rust. There are no drilled holes for an after market impact strip and the sound deadener is usually still intact. Often times it will still bear the original paint but do expect multiple, small door dings. This is the best condition Western door you could ever hope to find,...

Price: $199.67

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14527 -

You may consider buying our grade "B" door over our grade "A" door if you are doing a high end restoration. Here is the reasoning; due to the design of the 67-68 door, silt is trapped in all of the door corners, these tight recesses always have silt collected in them and when you add moisture you get corrosion. Our grade "A" doors do not have noticeable blisters but since there is no paint or sound deadener in the depths of the corners we know there is some amount of corrosion taking place...

Price: $400.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23604 -

You may consider buying our grade "B" door over our grade "A" door if you are doing a high end restoration. Here is the reasoning; due to the design of the 69-70 door, silt is trapped in all of the door corners, these tight recesses always have silt collected in them and when you add moisture you get corrosion. Our grade "A" doors do not have noticeable blisters but since there is no paint or sound deadener in the depths of the corners we know there is some amount of corrosion taking place...

Price: $264.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19643 -

You may consider buying our grade "B" door over our grade "A" door if you are doing a high end restoration. Here is the reasoning; due to the design of the 71-73 door, silt is trapped in all of the door corners, these tight recesses always have silt collected in them and when you add moisture you get corrosion. Our grade "A" doors do not have noticeable blisters but since there is no paint or sound deadener in the depths of the corners we know there is some amount of corrosion taking place...

Price: $12.55

Buy Details

Availability: In-Stock Item
Item #: 31959 -

Round hood latch dowel that screws into the hood on all 1967-68 Mercury Cougars. Threads are 1/2-13, dowel assembly includes threaded dowel, jamb nut and washer as shown.Fits many other Ford products, see list below.Replaces Ford part numbers C4ZB-16929 and C5ZZ-16929-A.

Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27506 -

Round hood latch dowel that screws into the hood on all 1967-68 Mercury Cougars. Threads are 1/2-13, dowel assembly includes threaded dowel, jamb nut and washer as shown.Fits many other Ford products, see list below.Replaces Ford part numbers C4ZB-16929 and C5ZZ-16929-A.

Price: $62.91

Buy Details

Availability: In-Stock Item
Item #: 41298 -

Reproduction fender fastener kit for Mercury Cougar Standard and XR7.

Price: $18.35

Buy Details

Availability: In-Stock Item
Item #: 41300 -

These reproduction hood and hinge bolts and U nuts fir both the Standard and XR7.

Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 41078 -

This reproduction hood latch and catch screw and U nut kit fits both the Standard and XR7 and is sold as a kit as pictured.

Price: $9.32

Buy Details

Availability: In-Stock Item
Item #: 41080 -

This reproduction hood latch vertical support screw and U nut kit fits both the Standard and XR7 and is s sold as a kit as pictured.

Price: $15.48

Buy Details

Availability: In-Stock Item
Item #: 41327 -

This reproduction quarter panel extension fastener kit fits both the Standard and XR7.

Price: $799.88

Buy Details

Availability: Out of Stock
Item #: 14519 -

Our grade "A" fenders are truly what you would expect from an "A" rated part! We never get returns on our grade "A" fenders which is very important considering the shipping costs involved. Grade "A" fenders have no rust or excessive filler and nothing more than dings or light scrapes for damage. When you turn it over you will not see anything more than light surface rust and no distorted wheel lip areas from over sized tires rubbing. We really inspect the area where the fender extension bolts...

Price: $799.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14521 -

Our grade "A" fenders are truly what you would expect from an "A" rated part! We never get returns on our grade "A" fenders which is very important considering the shipping costs involved. Grade "A" fenders have no rust or excessive filler and nothing more than dings or light scrapes for damage. When you turn it over you will not see anything more than light surface rust and no distorted wheel lip areas from over sized tires rubbing. We really inspect the area where the fender extension bolts...

Price: $599.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11259 -

Our grade "A" fenders are truly what you would expect from an "A" rated part! We never get returns on our grade "A" fenders which is very important considering the shipping costs involved. Grade "A" fenders have no rust or excessive filler and nothing more than dings or light scrapes for damage. When you turn it over you will not see anything more than light surface rust, no distorted wheel lip areas from over sized tires. We really inspect the area where the fender extension bolts on well as...

Price: $255.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14529 -

Our grade "B" fenders are often what many would consider Grade "A". "B" Grade fenders may have damage around the wheel lip from over sized tires or very minor rust at the bottom corner or a fixable dent but they will not have all of these. We know what body work costs and we do not save junk. We also have many fenders that would be considered grade B+ or A-, give us a call for detailed descriptions of what we currently have on hand. Keep in mind that when ordering multiple over-sized items...

Price: $281.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14531 -

Our grade "B" fenders are often what many would consider Grade "A". "B" Grade fenders may have damage around the wheel lip from over sized tires or very minor rust at the bottom corner or a fixable dent but they will not have all of these. We know what body work costs and we do not save junk. We also have many fenders that would be considered grade B+ or A-, give us a call for detailed descriptions of what we currently have on hand.  Keep in mind that when ordering multiple over-sized...

Price: $275.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15424 -

Our grade "B" fenders are often what many would consider Grade "A". "B" Grade fenders may have damage around the wheel lip from over sized tires or very minor rust at the bottom corner or a fixable dent but they will not have all of these. We know what body work costs and we do not save junk. We also have many fenders that would be considered grade B+ or A-, give us a call for detailed descriptions of what we currently have on hand. Keep in mind that when ordering multiple over-sized items...

Price: $275.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15425 -

Our grade "B" fenders are often what many would consider Grade "A". "B" Grade fenders may have damage around the wheel lip from over sized tires or very minor rust at the bottom corner or a fixable dent but they will not have all of these. We know what body work costs and we do not save junk. We also have many fenders that would be considered grade B+ or A-, give us a call for detailed descriptions of what we currently have on hand. Keep in mind that when ordering multiple over-sized items...

Price: $255.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11256 -

Grade "B" fenders will have minor rust in the lower portion behind the wheel or minor dents but it will not have both. Please call 503-463-1130 for details. Driver side fender for all 1971-72 Mercury Cougars. B grade sheet metal will need a couple of hours of minor body work performed prior to paint. *Customer Feedback* "The parts are in great condition, just as described! 30 year old metal parts with virtually no rust (not like my parts found in Iowa). Good communication and worked with me to...

  • < Prev