Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 49-96 of 122
Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41179 -

Fits 1967 Standard and XR7 Cougars or most Ford and Mercury with inside rear view mirrors. Also used on the 1967 xr7 hash marks located on the rocker.

Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 41338 -

Four nuts per bucket seat, 8 total nuts per car with bucket seats. Sold individually. Replaces Ford part # 378643-S. Phosphate & Oil (gray & black) finish

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20179 -

Unlike our reproduction nuts these good used original nuts can be purchased individually and they cost less to boot! 8 required per car, 4 per bucket seat.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27468 -

New plastic nut or insert for those 1/4 inch square holes in the grille for attaching the headlight doors (8 required there), and for the XR7 door pull panel mounting plates for attaching the actual door handles (2 required per side). Replaces Ford part # 379830-S1. Do you want to replace those worn out actuators yourself or are you looking for some great information on aligning the grille in your Cat? The videos below are your ticket! ...

Price: $1.67

Buy Details

Availability: In-Stock Item
Item #: 27457 -

New pan head screws for installing the automatic console shifter bezel. Sold as a set of 4. Used in conjunction with the 3 metal strips to attach the automatic shifter bezel. Correct black pan head Phillips screw. *HINT - The metal strips can be made from any strips of steel, they don't really need the edges folded if you don't cinch them down too tight. Metal strip should be 1-11/16" x 5/8" with a hole in the middle.

Price: $4.14

Buy Details

Availability: In-Stock Item
Item #: 41204 -

Fits 1968 Standard or XR7. Has a pair of longer screws for the 1968 lower section of the door panel. 

Price: $11.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20192 -

This fits behind the door panel and is needed to install your remote mirror correctly.*NOTE*1969 Cougar owners do not need this part as it is built in the the chromed plastic, rectangular bezel on the door panel.

Price: $1.95

Buy Details

Availability: In-Stock Item
Item #: 26206 -

Correct rivets for use after you have painted your car or installed a new door. No special tools needed for installation. Simply lightly tap the center recessed portion with a small bolt or blunt punch. If your plate is missing you can obtain a correct reproduction with your unique codes at www.martiauto.com. Sold as a pair. Replaces Ford Part #: C5ZZ-6223000-A or 354921-S.

Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 13974 -

This is the nylon roller that fits on the end of the window regulator arms. Includes rivet. Sold individually. 2 rollers required per window, 4 rollers required per car. Replaces Ford part number C5AZ-57262A32-A. Dimensions: 11/16" Diameter Here's an instructional video on how to install the rollers. Keep in mind that this is a YouTube video from Danchuk Manufacturing installing a different type roller, but the technique is the same: ...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26214 -

Replaces Ford Part #: C0AB-6423240-B. Four required per car, two per side. If your quarter glass is loose in the track and will not roll up and down these rollers are most likely the culprit. When the tracks get gummed up and the window takes too much effort to roll up and down, these brittle old rollers will break. Even if they are not broken they are often frozen in place from rust and will not spin freely. From our experience every 1967 - 1968 Cougar needs these replaced if they still have...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26324 -

Concours? almost, these are stainless steel screws with the wax tipped coating like the originals, for installing the door sill plates. The wax was deemed necessary by the Ford Motor Co. as a seal. These can be used on all years 1967-73 Mercury Cougar, Ford Mustang and most all other Ford, Mercury, Lincoln cars of the era. Works well with any of the reproduction sill plates, these were really made to be used with the premium reproduction sill plates in stainless steel. 1967-68 Cougar and...

Price: $12.87

Buy Details

Availability: In-Stock Item
Item #: 31711 -

Concours? almost, these are stainless steel screws with the wax tipped coating like the originals, for installing the door sill plates. The wax was deemed necessary by the Ford Motor Co. as a seal. These can be used on all years 1967-73 Mercury Cougar, Ford Mustang and most all other Ford, Mercury, Lincoln cars of the era. Works well with any of the reproduction sill plates, these were really made to be used with the premium reproduction sill plates in stainless steel. 1967-68 Cougar and...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10444 -

Sold individually, three per side, six per car required. These often get destroyed when you go to replace your door window regulator slides. Three of these are used to install the C7ZZ-6523288-A track. Stainless steel. Thread size: 8/32 Check out our handy diagram below to find other '67-'68 door parts you may need. All the item numbers shown can be typed in to the search bar on our site. (Click image to view full size) Not sure where to begin when it comes to replacing your window regulator?...

Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 41212 -

For attaching firewall sound deadening material to any 1967-68 Mercury Cougar Standard or XR7. 

Price: $0.95

Buy Details

Availability: In-Stock Item
Item #: 41268 -

Sold individually. Two needed for globe box cable 1967-70 Mercury Cougar. 3 needed for installation of turn signal switches 1967-73 Mercury Cougar or Ford Mustang.Ford number 379203-S. Phosphate & Oil (gray-black)

Price: $2.35

Buy Details

Availability: In-Stock Item
Item #: 26063 -

This is a very specialized screw that you do not want to fail or make do with an incorrect fitting or stripped screw. When removing your old screw you will most likely have to pull your pedal assembly and have a perfect fitting screw driver to remove the screw as the factory put them in very tight!

Price: $14.15

Buy Details

Availability: In-Stock Item
Item #: 41143 -

(3) Rear View Mirror Arm Screws (4) Kick Panel Screws (2) Coat Hooks Screws (6) Sun Visor Screws (18) Door Plate Screws (7) Windshield Trim Screws

Price: $4.68

Buy Details

Availability: In-Stock Item
Item #: 41186 -

One kit does both rear armrests for the XR7 or Standard interior coupe.

Price: $6.35

Buy Details

Availability: In-Stock Item
Item #: 41200 -

"Correct" for 1968 Standard or XR7.Includes:(2) #8 X 3/4" PH PN AB ZC screw with a Electrolytic Zinc & Wax finish(6) #8 X 3/4" PH OV AB 6HD ZC screw  with a Electrolytic Zinc & Wax finish

Price: $4.14

Buy Details

Availability: In-Stock Item
Item #: 41191 -

Fits 1967 and 1968 Standard or XR7

Price: $4.19

Buy Details

Availability: In-Stock Item
Item #: 10505 -

Set of 13 black Phillips oval headed screws for attaching the face pads onto 1967 Mercury Standard Cougars (non-XR7 models). Sold as a set of 13 screws, also sold individually under SKU 100022556. *Note - These screws are a glossy black in color.

Price: $9.32

Buy Details

Availability: In-Stock Item
Item #: 41218 -

Dash pad and moulding kit. Fits both Standard or XR7

Price: $4.19

Buy Details

Availability: In-Stock Item
Item #: 11055 -

New chrome screws for the upper dash pad moulding at the windshield. Seven chromed screws in the kit. Original style of screw with correct sized small Phillips head. Fits 1967-68 Mercury Cougar and Ford Mustang original trim.

MSRP:$1.49
Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41142 -

One size fits all.  Set of 4.  Good replacement if not worried about show quality. 1967 – 1968 Coupe 6 Required per car 1969 – 1973 Coupe 4 required per car 1969 – 1973 Convertible 2 required per car Will also work on the 69 - 73 shifter bezels. 4 required. Not recommended for our Mass Backed Carpeting. Please see related items for the longer screws. Replaces Ford Part #: 381571-S

Price: $4.05

Buy Details

Availability: In-Stock Item
Item #: 41206 -

Fits 1967 - 1968 Standard or XR7

Price: $7.85

Buy Details

Availability: In-Stock Item
Item #: 18971 -

Sold in a set of 18 Replaces Ford # 376290

Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 41203 -

Fits 1967 and 1968 Standard or XR7

Price: $6.35

Buy Details

Availability: In-Stock Item
Item #: 41182 -

Fits 1967 and 1968 Standard or XR7

Price: $9.25

Buy Details

Availability: In-Stock Item
Item #: 41175 -

Reproduction Instrument Finish Panel Cluster Screws for the 1967 and 1968 Mercury Cougar

Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 41178 -

Fits 1967 Standard or XR7

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41207 -

For the 1968 but will fit both 1967 and 1968 Standard or XR7 Cougars or Mustangs

Price: $5.25

Buy Details

Availability: In-Stock Item
Item #: 41195 -

Fits 1967 Standard or XR7 Sold as a Set as Pictured. Similar to 1968, 1968 has a pair of longer screws for the reinforced 1968 rear panels.

Price: $2.87

Buy Details

Availability: In-Stock Item
Item #: 41213 -

Fits Standard or XR7 Sold in a pack of 8 screws

Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 26077 -

1969-70 actually used a star head bolt but these are a much more user friendly screw that will work in its place. Sold in a set of four which is what you will need for one seat.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10480 -

Set of 4 new phillips oval head mounting screws with black finish for all 1967-68 Mercury Cougar automatic shifter bezel mounting plates without console and XR7-G bezels. Also fits 1965-68 Ford Mustangs with automatic transmissions and without consoles. Check out our video on rebuilding your shifter below: ...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10478 -

Set of 4 screws for mounting the automatic shifter adapter plate on all 1967-68 Mercury Cougars without console. Also fits 1965-68 Ford Mustangs without console. Check out our video on rebuilding your shifter below: ...

Price: $2.07

Buy Details

Availability: In-Stock Item
Item #: 41193 -

These self-tapping screws attach the cardboard taillight protectors to the body, inside the trunk. Fits 1967 and 1968 Standard or XR7, sold in set of 4.

Price: $5.27

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-0003 -

Good used original seat belt bolt. There were a few different variations of this bolt, some were stamped with a B and others had no stamping at all. 13/16" hex head, 1-1/2 inch bolt with a 3/16 inch shoulder. 

Price: $37.85

Buy Details

Availability: In-Stock Item
Item #: 30177 -

Complete set of front seat belt bolts for your 67 - 68 Cougar or Mustang. Included are the 4 bolts, 4 large washers, 2 spacers and 4 rubber anti-rattle gaskets. Get the rear set here.

Price: $28.65

Buy Details

Availability: In-Stock Item
Item #: 30180 -

Complete set of rear seat belt bolts for your 67 - 68 Cougar or Mustang. Included are the 4 bolts and 4 spacers. Get the front set here.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27512 -

New 8-32 set screw for the rear window crank handles. Fits 1968-70 Mercury Cougar and Ford Mustang. Allen hex size of 5/64".

Price: $26.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33534 -

Driver side bracket that fits onto the rear radio bracket assembly on the 67 - 68 Cougar or Mustang equipped with a console. The bracket assembly is 3 separate pieces, this is for the driver side bracket only.