Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: https://secure.cougarpartscatalog.com/store/onepagecheckout.aspx.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

1967 - 1973 Mercury Cougar Body Parts including sheet metal, brackets, fender extensions and other parts found on the body of your Cougar can be found here. Need help? Call 503-463-1130


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 1656
Price: $253.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19899 -

Reproduction "A" pillar repair panels for your 67 - 68 Cougar or Mustang. Included in this kit are the two pillar patches and four backing plates for the door hinges.

Price: $50.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30963 -

Reproduction driver side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30961 -

Reproduction driver side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

Price: $149.15

Buy Details

Availability: In-Stock Item
Item #: 26916 -

Reproduction inner "A" pillar panel and fresh air vent vent panel set for the driver side (left hand) of the Mercury Cougar or Ford Mustang. This item features weld through primer and is ready to install. Unfortunately both Cougars and Mustangs alike are prone to rust in these areas, so finding a nice original piece can be difficult. We're delighted to have this high quality panel set to offer you the perfect pieces to replace those rusty units you have now!

Price: $143.65

Buy Details

Availability: In-Stock Item
Item #: 26917 -

Reproduction inner "A" pillar and fresh air vent panel set for the passenger side (right hand) of the Mercury Cougar or Ford Mustang. This item features weld through primer and is ready to install. Unfortunately both Cougars and Mustangs alike are prone to rust in these areas, so finding a nice original piece can be difficult. We're delighted to have this high quality panel set to offer you the perfect pieces to replace those rusty units you have now!

Price: $50.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30962 -

Reproduction passenger side inner A pillar inner / kick panel for the 67 - 68 Cougar or Mustang.

Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30960 -

Reproduction passenger side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

Price: $226.75

Buy Details

Availability: In-Stock Item
Item #: 31749 -

Reproduction pair of A/C vent registers for your 69 - 70 Cougar or Mustang. Sold as a pair. Replaces Ford part numbers: C9ZZ-19893-D driver side, C9ZZ-19893-C passenger side.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0267 -

Ford called this small door latch part an adjuster. It threads onto the bottom of the door latch rod inside the door. Common to most Ford products 1965-1970. Ford part number C5AZ-62218106-A.

Price: $29.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30483 -

This knurled nut is located under the front slides in each corner (1 per side, 2 per car) and is used to adjust the height of the sun roof panel.

Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33477 -

This plate is what is located on the backside of your door jam where your striker threads in on the driver side.

Price: $18.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33576 -

This plate is what is located on the backside of your door jam where your striker threads in on the driver side. Two threaded holes for attaching the striker plates on any 1967-70 Mercury Cougar or Ford Mustang. Right and left are the same. 

Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33478 -

This plate is what is located on the backside of your door jam where your striker threads in on the passenger side.

Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31591 -

Threaded anchor that slides into the trunk hinge on each side. Sold individually, two needed per car. These are for Cougar and Mustang built after approximately 3/31/1971. Look for bolt spacing of 4-1/4 inches on those trunk lids.  Ford number C9AZ-6242752-A.*Note - Trunks prior to March 31, 1971, did not use this anchor plate. I think that they had a bolt spacing of 4-1/2 inches.

Price: $10.36

Buy Details

Availability: In-Stock Item
Item #: 30757 -

Reproduction Concours correct door lock rod anti rattle sleeve. This will come in a 33" length, and is cut-to-fit.

Price: $2.55

Buy Details

Availability: In-Stock Item
Item #: 26674 -

These keep the trunk hinge spring rods from rattling. These are a reproduction of the anti-rattler for 67-68 Cougar / 65-68 Mustang.   Replaces Ford part # C5ZZ-6545028. These also work for the 69-70 Cougar / Mustang better than what came factory, which, according to the Ford MPC, for 69-70 would have actually been 1/8" x 7/8" Vinyl Foam Weatherstrip Tape, Ford part C6AZ-19627-A. Check out our trunk torsion bar installation video: ...

Price: $12.35

Buy Details

Availability: In-Stock Item
Item #: 10090 -

Reproduction driver side (left hand) rear apron extension for 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Price: $12.35

Buy Details

Availability: In-Stock Item
Item #: 10089 -

Reproduction passenger side (right hand) rear apron extension for the 1967 - 1968 Mercury Cougar and Ford Mustang. These plates almost always get destroyed when installing new aprons, so don't forget to grab one for each side you work on.

Price: $661.37

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 12211 -

Improved reproduction pair of sun roof cables for the Mercury Cougar but they will interchange with most all early Golde / American Sunroof Corporation Moonroof / Sunroofs. Keep in mind this same basic cable design was used on many makes including Thunderbird, Lincoln, Mopar, BMW, Mercedes, Porsche and several other cars. (minor revisions were made through the years). These cables measure 64 1/2" tip to tip which may be too long for some applications. All examples we have found for the Cougar...

Price: $1,099.89

Buy Details

Availability: Out of Stock
Item #: 30448 -

Good used solid panel with all parts removed. Panel measures 19.5" x 37". Whereas at first glance these may all look the same, the contour of the roof changes with the body style changes. Call us for price and availability on panels with varying degrees of repairable rust.

Price: $350.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33434 -

Grade B used panel with all parts removed. Panel measures 19.5" x 37". Whereas at first glance these may all look the same, the contour of the roof changes with the body style changes. Grade B will have some rust through in several places. 

Price: $1.05

Buy Details

Availability: In-Stock Item
Item #: 26086 -

Protects door panels from the abrasive action of rotating handles. Made from a very hard nylon type material featuring the correct milky white color. Replaces Ford Part #: C5AZ-6223370-A.

Price: $2.38

Buy Details

Availability: In-Stock Item
Item #: 26100 -

Protects quarter panels from the abrasive action of rotating handles. Made from a very hard nylon type material featuring the correct milky white color. Replaces Ford Part #: C4SZ-6323370-A.

Price: $157.95

Buy Details

Availability: In-Stock Item
Item #: 23687 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23561 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $159.35

Buy Details

Availability: In-Stock Item
Item #: 23686 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23559 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough to do both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23684 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $148.68

Buy Details

Availability: In-Stock Item
Item #: 19014 -

NOTE: At the moment the supplier is only making the late model version of this beltline kit. The late version has a slight bend in the chromed quarter piece, whereas the early version is straight (see photo above). Made With Exact Materials As Original. Eight piece kit that includes inner and outer belt-line, enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them...

Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23562 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $141.45

Buy Details

Availability: In-Stock Item
Item #: 23560 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $167.49

Buy Details

Availability: In-Stock Item
Item #: 23685 -

Eight piece kit that includes inner and outer belt-line for both door and quarter glass. This kit contains enough for both pieces of door and quarter glass. These strips run horizontally against your glass and keep water and debris from entering your rear quarter panels and doors causing them to rust out. These kits include the correct stainless steel trim on the interior side strips. Old belt-lines will become hard and trap grit causing your glass to get heavy vertical scratches. You can...

Price: $21.85

Buy Details

Availability: In-Stock Item
Item #: 14042 -

A nice reproduction of the inner door remote mirror bezel. This is concours quality and an exact fit and finish. Just like the originals, these are made from chromed plastic. Comes with correct mounting hardware. Replaces Ford Part # : C8SZ-17B733-B

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13008 -

Metal reinforcing plate welded to the center of the rear body, where the third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1967-68 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang. 9 inch rear ends would be as shown. 8 inch rear ends would have a rubber axle snubber bumper attached. See related items.This part will come as shown, spot welds will need to be drilled and...

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13157 -

Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1969-70 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang. This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.

Price: $67.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13369 -

Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1971-73 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang.This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.

Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 11377 -

These are about half the weight of originals and do not look correct in any way. They are far better than nothing. Bolts to the left hand and right hand lower floor reinforcement panels. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Replaces Ford Part # C5ZZ-7610962-A. The Ford description of this plate is "Plate - Front floor lower cross member". All 1969 - 1973 Cougar convertibles and all 1965 - 1973 Ford Mustang...

Price: $89.15

Buy Details

Availability: In-Stock Item
Item #: 32000 -

Good reproduction reinforcing plate, contours are like the C5ZZ-7610962-A plate which was used through 1970. Thick steel like the originals, and with same contours. Bolts to the left hand and right hand lower floor reinforcement panels. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Replaces Ford Part # C5ZZ-7610962-A. The Ford description of this plate is "Plate - Front floor lower cross member". All 1969 - 1973...

Price: $1.08

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0456 -

57084-S Attaching bolt with 7/16" hex head and captured washer. Among other things, it is used to attach the door run, window stops (all 3), both window stabilizers, and the window regulator. Same bolts for manual and power window regulators. Bolt sold individually, there are a good handful in each door. This bolt is used for bolting in the bolt-in glass on 1970, lower "L" bracket for rear quarter windows on 1971-73 Cougar and Mustangs.

Price: $1.00

Buy Details

Availability: In-Stock Item
Item #: 30254 -

Bolt with toothed washer for attaching 1967-68 Mercury Cougar and Ford Mustang door window parts. Both of the door window rear stops, and rear door guide. 1/4-20 bolt threads.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19330 -

Ford part # for the nut is 33772-S4, for the bolt 370301-S8, and the flat washer 358994-S.Slight changes in the hardware between the start of 1969 and the end of 1970. We see a slight difference in the height of the nut. Hard to tell unless side by side.

Price: $2.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19000 -

7/16-14 x 1-1/4" style bolt and nut for installing the shock tower brace to the cowl. One bolt and nut. Usually we see the tall nuts, sometimes there are slightly shorter nuts. Not sure if Dearborn or San Jose thing or supplier variations, during the two years of production. Ford part # for the nut is 375918-S7-8, bolt 370301-S8.

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41302 -

These reproduction fender to pillar bracket bolts fit both the Standard and XR7.

Price: $4.05

Buy Details

Availability: In-Stock Item
Item #: 41110 -

Reproduction pair of 1 1/8" long hood latch support bolts for the 1968 Mercury Cougar. Looking through cars with original parts, we've found a few different variations of the types of bolts used. It would be best to measure what you have and purchase the correct length bolts.

Price: $3.65

Buy Details

Availability: In-Stock Item
Item #: 41312 -

These reproduction hood latch catch bolts fit both the Standard and XR7.